Home › Blog › Measure Guide

How to Measure Objects With Your Phone — DocFila Measure Guide

By DocFila Team · March 24, 2026 · 5 min read

Forgot the tape measure? DocFila's Measure tool can estimate the straight-line distance between two points on an object, using a reference object of known size in the same picture. It is a quick check, not a replacement for a tape measure when an error would be costly.

How DocFila Measure Works

Measure does not use augmented reality or depth sensors such as LiDAR. It works from a flat camera view or a photo: you mark a reference object whose size is known (a credit card, an A4 or US Letter sheet, or a US quarter), and DocFila works out the scale from it. You then tap the two ends of the object you want to measure, and DocFila shows the distance between them. Until you calibrate against a reference object, no length is shown.

Because the scale comes from the reference, a measurement is only valid for things in the same plane as the reference and at about the same distance from the camera. DocFila does not state an accuracy figure; how close the result is depends on how precisely you mark the reference and the object, and on the camera angle.

Camera Measure and Photo Measure

Camera Measure uses the live camera on your phone. Photo Measure works on a photo from your gallery that already contains a reference object. Camera Measure runs on phones; Photo Measure is also available elsewhere in the app.

Step by Step

1. Open Measure. Open DocFila and go to the Measure tool. Grant camera access when prompted.
2. Place a reference. Put a credit card, an A4 or Letter sheet, or a US quarter beside the object, flat on the same surface.
3. Calibrate. Tap the two ends of the reference object. Taps that are too close together are refused.
4. Mark the object. Tap the two ends of the thing you want to measure. The distance appears once the scale is set.
5. Check it. Compare the result with a tape measure if it matters. Turning the phone ends the calibration, so recalibrate if you move.

Tips for a Better Measurement

• Hold the phone square to the object. An angled view distorts the scale.
• Keep the reference and the object in the same plane and at the same distance from the camera.
• Mark the ends precisely. Zoom in if you need to; a few pixels of error become millimetres.
• Avoid reflective or glass surfaces, where the edges are hard to see.

What It Cannot Do

Measure does not make floor plans or room dimensions, and it does not calculate areas, volumes or heights. It measures straight distances between two points you mark. For anything where an error is costly — furniture purchases, construction materials, shipping dimensions — use a tape measure.

Start Measuring With Your Phone

Related DocFila tools

Keep going with the document workflow that matches this page. Open the tool you need, then finish the file in DocFila.